Larry H. Miller Chrysler Dodge Jeep Ram Avondale

Ram C/V Tradesman ABS and Brake Light

Ram C/V Tradesman ABS and Brake Light service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, AZ

Frequently asked questions
2014 Ram C/V Tradesman shown

The ABS light on a Ram C/V Tradesman means the anti-lock braking system has switched itself off, most often because of a wheel-speed sensor fault, while normal braking remains but the wheels can lock during a hard stop. A red brake light signals a different concern involving the parking brake, brake fluid, or hydraulic system. Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, AZ, provides ABS and Brake Light service for Ram C/V Tradesman models across all model years. The inspection traces the warning to the sensor, fluid, pads, parking brake switch, or related hydraulic concern so the driver receives a clear explanation of the brake system’s condition.

What the ABS and brake lights mean on a Ram C/V Tradesman

An amber ABS light that remains on after the Ram C/V Tradesman starts means the anti-lock system has switched itself off. Normal braking remains, but the wheels may lock during a hard stop, making the warning important to address. A red BRAKE light, or a circle with an exclamation point, that stays on after the parking brake is released can indicate an applied parking brake, low brake fluid, or a hydraulic system fault. Low fluid usually points to worn pads or a leak. A soft pedal, a pedal that travels farther than usual, or wheels that lock in a hard stop also requires attention. If both lights are on, or if the red light appears with a soft pedal, the vehicle should not be driven.

What the diagnosis covers at Larry H. Miller Chrysler Dodge Jeep Ram Avondale

ABS and Brake Light service begins with a scan of the anti-lock brake module for stored trouble codes. The inspection then tests the wheel-speed sensors, their wiring, and the tone rings that support the system’s readings. Brake fluid level and condition are checked along with pad wear and the parking brake switch. These steps help distinguish a wheel-speed sensor concern from a fluid, pad, parking brake, or hydraulic issue rather than guessing at the warning. Because the amber ABS light and red brake light communicate different conditions, identifying which warning is present matters. Drivers can schedule service with Larry H. Miller Chrysler Dodge Jeep Ram Avondale for a focused brake-system inspection.

Booking at Larry H. Miller Chrysler Dodge Jeep Ram Avondale

The visit includes an anti-lock module scan and an inspection of the brake components named above, including wheel-speed sensors, wiring, tone rings, fluid, pads, and the parking brake switch. The findings help trace the warning to its source and clarify the next step. To schedule service, contact Larry H. Miller Chrysler Dodge Jeep Ram Avondale or use the service scheduling page. The dealership is located at 10101 West Papago Freeway, Avondale, AZ 85323. Call 480-207-2126.

Frequently Asked Questions

5 common questions answered

What does the ABS light mean on a Ram C/V Tradesman?The amber ABS light means the anti-lock system has switched itself off, most often because of a wheel-speed sensor fault.

Normal braking remains, but the wheels can lock during a hard stop. An anti-lock module scan and brake-system inspection can trace the warning.

What is the difference between the amber ABS light and red brake light?The amber ABS light concerns the anti-lock system, while the red brake light can indicate the parking brake, brake fluid, or hydraulic system.

The red BRAKE light may remain on with the parking brake released when fluid is low or a hydraulic fault is present. Low fluid usually points to worn pads or a leak.

Is it safe to drive with the ABS light on?With the ABS light on, normal braking remains, but the wheels can lock in a hard stop.

If both the ABS and red brake lights are on, or if the red light appears with a soft pedal, the vehicle should not be driven. A pedal that travels farther than usual also needs attention.

What usually causes the ABS and brake lights?The named causes include a wheel-speed sensor fault, low or poor-condition brake fluid, worn pads, a parking brake switch concern, or a hydraulic fault.

The diagnosis checks the wheel-speed sensors, wiring, tone rings, brake fluid, pad wear, and parking brake switch. The anti-lock module is scanned for stored trouble codes.

How do I book ABS and Brake Light service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale?Drivers can schedule service online or call Larry H. Miller Chrysler Dodge Jeep Ram Avondale at 480-207-2126.

The visit includes the anti-lock module scan and a brake-system inspection. The dealership is located at 10101 West Papago Freeway, Avondale, AZ 85323.