Larry H. Miller Chrysler Dodge Jeep Ram Avondale

Jeep Wrangler ABS and Brake Light

Jeep Wrangler ABS and Brake Light service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, AZ

Frequently asked questions
2027 Jeep Wrangler Rubicon shown

The amber ABS light on a Jeep Wrangler means the anti-lock braking system has switched itself off, while the red brake light can signal an applied parking brake, low brake fluid, or a hydraulic fault.

Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, AZ, provides ABS and brake light diagnosis for Jeep Wrangler SUVs across all model years. The visit focuses on identifying whether the warning relates to a wheel-speed sensor, wiring, tone ring, brake fluid, pad wear, parking brake switch, or another named brake-system concern. Drivers can arrange an inspection through the dealership’s service department and receive guidance based on the vehicle’s warning lights and brake-pedal feel.

What the ABS and brake lights mean on a Jeep Wrangler

An amber ABS light that stays on after the Jeep Wrangler starts means the anti-lock system has switched itself off, most often because of a wheel-speed sensor fault. Normal braking remains, but the wheels can lock during a hard stop. A red BRAKE light, or a circle with an exclamation point, that remains illuminated with the parking brake released can mean the brake fluid is low or the hydraulic system has a fault; it can also indicate that the parking brake is applied. Low fluid usually points to worn pads or a leak. A soft pedal or a pedal that travels farther than usual is an urgent warning. With both lights on, or with a red light and a soft pedal, the vehicle should not be driven.

What the diagnosis covers at Larry H. Miller Chrysler Dodge Jeep Ram Avondale

The diagnosis begins with a scan of the anti-lock brake module for stored trouble codes. The inspection then covers the wheel-speed sensors, their wiring, and the tone rings that support the anti-lock system. The technician also checks brake fluid level and condition, pad wear, and the parking brake switch. These steps help trace the warning to a sensor, fluid condition, pad concern, or parking-brake input rather than guessing at the cause. Drivers can schedule service with Larry H. Miller Chrysler Dodge Jeep Ram Avondale for an ABS and brake light inspection.

Recalls on the Jeep Wrangler

NHTSA campaign 18V098000 covers the 2017 Jeep Wrangler and involves brake switches that may malfunction, keeping the brake lamps illuminated and/or allowing the vehicle to shift out of PARK without the brake pedal pressed. This can increase the risk of a crash. Larry H. Miller Chrysler Dodge Jeep Ram Avondale checks open recalls by VIN and performs the recall remedy at no charge to the owner; the remedy is replacement of the brake switches.

Booking at Larry H. Miller Chrysler Dodge Jeep Ram Avondale

An appointment includes an anti-lock module scan and inspection of the brake warning systems, wheel-speed components, brake fluid, pads, and parking brake switch. Drivers can schedule service online or contact Larry H. Miller Chrysler Dodge Jeep Ram Avondale at 480-207-2126. The dealership is located at 10101 West Papago Freeway, Avondale, AZ 85323.

Frequently Asked Questions

5 common questions answered

What does the ABS light mean on a Jeep Wrangler?The ABS light means the anti-lock system has switched itself off, most often because of a wheel-speed sensor fault.

Normal braking remains, but the wheels can lock during a hard stop. An inspection can test the wheel-speed sensors, wiring, and tone rings.

What is the difference between the amber ABS light and the red brake light?The amber ABS light concerns the anti-lock system, while the red brake light can indicate an applied parking brake, low fluid, or a hydraulic fault.

Low brake fluid usually points to worn pads or a leak. With both lights on, or with a red light and a soft pedal, the vehicle should not be driven.

Is it safe to drive with the ABS light on?With the ABS light on, normal braking remains, but the wheels can lock in a hard stop.

The light means the anti-lock system has switched itself off. If the red brake light is also on, or the pedal feels soft, the Jeep Wrangler should not be driven.

What usually causes the ABS and brake lights to come on?The named causes include a wheel-speed sensor fault, low brake fluid, worn pads, a leak, an applied parking brake, or a hydraulic-system fault.

The diagnosis checks the anti-lock module, sensors, wiring, tone rings, fluid, pads, and parking brake switch. Testing identifies the system concern instead of relying on the warning light alone.

How do I book Jeep Wrangler ABS and brake light service?Drivers can schedule service with Larry H. Miller Chrysler Dodge Jeep Ram Avondale online or by calling 480-207-2126.

The dealership is located at 10101 West Papago Freeway, Avondale, AZ 85323. The visit includes an anti-lock module scan and inspection of the related brake-system components.