Larry H. Miller Chrysler Dodge Jeep Ram Avondale

Jeep Grand Cherokee ABS and Brake Light

Jeep Grand Cherokee ABS and Brake Light service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, AZ

Frequently asked questions
2027 Jeep Grand Cherokee Summit shown

On the Jeep Grand Cherokee, an amber ABS light means the anti-lock braking system has switched itself off, while a red brake light can indicate an applied parking brake, low brake fluid, or a hydraulic fault; normal braking may remain with an ABS light, but the wheels can lock during a hard stop, and the vehicle should not be driven when both lights are on or when a red light appears with a soft pedal. A light that remains after startup, a pedal that feels soft or travels farther than usual, or wheels that lock in a hard stop calls for prompt inspection rather than guesswork.

Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale diagnoses ABS and brake warnings on the Jeep Grand Cherokee with a focused inspection of the anti-lock and brake systems.

What the ABS and brake lights mean on a Jeep Grand Cherokee

The amber ABS light may stay on after the vehicle starts when the anti-lock system has switched itself off, most often because of a wheel-speed sensor fault. Normal braking remains, but the wheels may lock during a hard stop. The red BRAKE light, or a circle with an exclamation point, has a different meaning: it may show that the parking brake is applied, the brake fluid is low, or the hydraulic system has a fault. Low fluid usually points to worn pads or a leak. A soft pedal or a pedal that travels farther than usual adds urgency. When both warning lights are illuminated, or when the red light is paired with a soft pedal, the vehicle should not be driven.

What the diagnosis covers at Larry H. Miller Chrysler Dodge Jeep Ram Avondale

The inspection begins with a scan of the anti-lock brake module for stored trouble codes. The brake diagnosis also includes testing the wheel-speed sensors, their wiring, and the tone rings that support sensor operation. Brake fluid level and condition are inspected along with pad wear and the parking brake switch. This process helps trace the warning to a sensor, fluid condition, pad wear, parking-brake switch, or hydraulic concern instead of guessing from the dashboard symbol alone. Drivers can schedule service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale for an ABS and brake light inspection.

Recalls on the Jeep Grand Cherokee

  • NHTSA 17V572000, 2013–2014: A brake booster shield may have been installed incorrectly, potentially reducing braking ability; the remedy verifies and corrects the installation.
  • NHTSA 16V249000, 2016: A loose shifter-solenoid connection may affect Park or Neutral operation and disable the vehicle in traffic; the remedy replaces the shifter assembly.
  • NHTSA 16V168000, 2015–2016: An incorrect-material left front brake caliper may crack, lengthening stopping distance; the remedy inspects and may replace the caliper.
  • NHTSA 14V154000, 2013–2014: Brake-booster corrosion may allow water inside and limit braking ability; the remedy tests the booster and adds a water diverter shield.
  • NHTSA 14V104000, 2013: The Ready Alert Braking System may create a hard pedal and lengthen stopping distance; the remedy updates the ABS module software.

Larry H. Miller Chrysler Dodge Jeep Ram Avondale checks open recalls by VIN and performs a recall remedy at no charge to the owner.

Booking at Larry H. Miller Chrysler Dodge Jeep Ram Avondale

A visit includes an anti-lock module scan and inspection of the wheel-speed sensors, wiring, tone rings, brake fluid, pads, and parking brake switch. Drivers can schedule service online or call (480) 207-2126. Larry H. Miller Chrysler Dodge Jeep Ram Avondale is located at 10101 West Papago Freeway, Avondale, AZ 85323.

Frequently Asked Questions

5 common questions answered

What does the ABS light mean on a Jeep Grand Cherokee?The amber ABS light means the anti-lock system has switched itself off.

Normal braking remains, but the wheels can lock in a hard stop. A wheel-speed sensor fault is the most often named cause.

What is the difference between the amber ABS light and red brake light?The ABS light concerns the anti-lock system, while the red brake light can indicate the parking brake, low fluid, or a hydraulic fault.

The red light may also appear as a circle with an exclamation point. Both lights together, or a red light with a soft pedal, means the vehicle should not be driven.

Is it safe to drive with the ABS light on?Normal braking may remain with only the ABS light on, but the wheels can lock during a hard stop.

If the red brake light is also on or the pedal feels soft, the vehicle should not be driven. An inspection can identify the warning's source.

What usually causes the ABS and brake lights?The named causes include a wheel-speed sensor fault, low brake fluid, worn pads, a leak, an applied parking brake, or a hydraulic fault.

The diagnosis checks the sensors, wiring, tone rings, fluid, pads, and parking brake switch. A module scan helps trace the warning.

How do I book ABS and brake light service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale?Drivers can schedule service online or call (480) 207-2126.

The visit includes an anti-lock module scan and brake-system inspection. Larry H. Miller Chrysler Dodge Jeep Ram Avondale is at 10101 West Papago Freeway, Avondale, AZ 85323.