Larry H. Miller Chrysler Dodge Jeep Ram Avondale

Chrysler 200 ABS and Brake Light

Chrysler 200 ABS and Brake Light service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, AZ

Frequently asked questions
2017 Chrysler 200 Limited shown

On a Chrysler 200, an amber ABS light means the anti-lock braking system has switched itself off, while a red BRAKE light can indicate an applied parking brake, low brake fluid, or a hydraulic fault. The amber symbol may appear as “ABS,” and the red warning may read “BRAKE” or show a circle with an exclamation point. Normal braking can remain with only the ABS light on, but the wheels may lock during a hard stop. A red light with a soft pedal, or both warning lights together, requires the vehicle not to be driven. A brake and ABS inspection identifies whether the concern involves a wheel-speed sensor, fluid, brake pads, the parking brake switch, or the hydraulic system.

Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, AZ, provides ABS and Brake Light diagnosis for Chrysler 200 vehicles across all model years.

What the ABS and brake lights mean on a Chrysler 200

An amber ABS light that remains on after the Chrysler 200 starts means the anti-lock system has switched itself off. The most often identified issue is a wheel-speed sensor fault, although diagnosis is needed to trace the warning. Normal braking remains, but the wheels can lock in a hard stop. A red BRAKE light, or a circle with an exclamation point, that stays on after the parking brake is released may indicate low brake fluid or a hydraulic fault. Low fluid usually points to worn brake pads or a leak. If both lights are illuminated, or the red light appears with a soft pedal, the Chrysler 200 should not be driven.

What the diagnosis covers at Larry H. Miller Chrysler Dodge Jeep Ram Avondale

The inspection begins with a scan of the anti-lock brake module for stored trouble codes. The brake system check then includes testing the wheel-speed sensors, their wiring, and the tone rings. Brake fluid level and condition are inspected along with pad wear and the parking brake switch. This process helps trace the warning to a sensor, fluid condition, worn pads, or the hydraulic system rather than relying on the dashboard light alone. Chrysler 200 drivers can schedule service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale for an ABS and brake inspection.

Booking at Larry H. Miller Chrysler Dodge Jeep Ram Avondale

An ABS and Brake Light visit includes an anti-lock module scan and inspection of the related brake components. The goal is to identify the source of the warning and determine whether the concern involves a sensor, fluid, pads, the parking brake switch, or the hydraulic system. Chrysler 200 drivers can schedule service online. Larry H. Miller Chrysler Dodge Jeep Ram Avondale is located at 10101 West Papago Freeway, Avondale, AZ 85323. Call 480-207-2126.

Frequently Asked Questions

5 common questions answered

What does the ABS light mean on a Chrysler 200?The amber ABS light means the anti-lock system has switched itself off.

Normal braking remains, but the wheels can lock during a hard stop. A scan and inspection can trace the warning to a wheel-speed sensor, wiring, tone ring, fluid, pads, or another named brake-system concern.

What is the difference between the amber ABS light and the red brake light?The amber ABS light concerns the anti-lock system, while the red brake light can indicate the parking brake, low fluid, or a hydraulic fault.

The red light may appear as “BRAKE” or as a circle with an exclamation point. Low fluid usually points to worn pads or a leak, and a soft pedal increases the urgency.

Is it safe to drive with the ABS light on?With only the ABS light on, normal braking remains, but the wheels may lock in a hard stop.

If both lights are on, or the red brake light appears with a soft pedal, the Chrysler 200 should not be driven. An inspection is needed to identify the condition.

What usually causes the ABS and brake lights?The named causes include a wheel-speed sensor fault, low brake fluid, an applied parking brake, or a hydraulic-system fault.

Brake pad wear or a leak can usually explain low fluid, and the parking brake switch is part of the inspection. The anti-lock module, sensors, wiring, and tone rings are tested during diagnosis.

How do I book ABS and brake light service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale?Chrysler 200 drivers can schedule service online with Larry H. Miller Chrysler Dodge Jeep Ram Avondale.

The visit includes an anti-lock module scan and brake-system inspection. The dealership is at 10101 West Papago Freeway, Avondale, AZ 85323, and can be reached at 480-207-2126.