2026 Ram 1500 REV Alignment: Specs & Service

Alignment service is generally worth considering every 2–3 years or 30,000 miles, after suspension work, or after a major pothole impact. Road impacts can change wheel angles even when a vehicle initially feels normal. Larry H. Miller Chrysler Dodge Jeep Ram Avondale can measure the current angles against factory specifications before recommending an adjustment.

• Consider an alignment after suspension component replacement.
• Have the angles checked after a major pothole impact.
• Use symptoms and measurement results to guide service.

Wheels out of alignment scrub the tires as the 2026 Ram 1500 REV rolls, which can wear one tread edge faster than the other. The vehicle may pull on a flat road or the steering wheel may sit crooked while driving straight. Vibration at speed can also be a reason to request an inspection, although other components may cause it.

• Vehicle pulls left or right on a flat road.
• Steering wheel is off center while traveling straight.
• One tire edge wears faster than the other.

The technician checks the tires, steering, and suspension for wear that could hold the alignment out of specification. Where the suspension allows, the measured angles are adjusted toward the manufacturer’s specification. Booking gives you current angle measurements first, helping show whether an adjustment is needed before paying for one.

• Camber, caster, and toe measurement on all four wheels.
• Inspection of tires, steering, and suspension components.
• Adjustment toward manufacturer specification where possible.

An alignment inspection should include the steering and suspension components that affect wheel angles. If a worn part is found, adjusting the angles alone may not correct the underlying problem. The service team at Larry H. Miller Chrysler Dodge Jeep Ram Avondale can identify the condition during inspection and explain whether additional work is needed.

• Steering and suspension components are checked for wear.
• Tie rods, ball joints, or struts may affect alignment results.
• Service recommendations should be based on inspection findings.

Measurement is especially useful after a major pothole impact, suspension work, or a change in tire wear. The 2026 Ram 1500 REV can have its current angles compared with factory specifications before an adjustment is recommended. This approach helps determine whether alignment service is appropriate rather than assuming it is needed.

• Check after a major pothole impact.
• Check after suspension work or component replacement.
• Inspect when tire wear becomes uneven.

The measurements show whether the wheels are positioned within the applicable factory range and whether an adjustment may help correct pulling or uneven tread wear. The inspection also looks for tire, steering, and suspension wear that could affect the result. This gives Avondale drivers a measurement-based next step for the 2026 Ram 1500 REV.

• Camber controls wheel tilt viewed from the front.
• Caster relates to steering-axis angle and steering feel.
• Toe compares the direction the tires point to one another.

The technician measures camber, caster, and toe on all four wheels. Where the suspension allows, adjustments are made toward the manufacturer’s specification. The key purpose is to measure first, so the driver can learn whether an adjustment is needed before paying for one. The service addresses the angles that can cause tire scrub, pulling, or an off-center steering wheel.

After the measurements and any applicable adjustments, the vehicle can be evaluated for the symptoms that prompted the visit. Alignment service does not replace repairs for worn steering or suspension components; those conditions may need attention before an alignment can hold. Schedule service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale by calling 480-207-2126.

Before adjustment, the technician inspects tires, steering, suspension, and tie-rod components for wear that could hold the alignment out of specification. A worn component can make a vehicle difficult to align consistently, so measurement and inspection should be considered together. Factory-specification alignment equipment and procedures are used to compare current angles with the applicable vehicle reference points.

The 2026 Ram 1500 REV is an electric Crew Cab with rear-wheel drive and comes in one trim. Its alignment service focuses on the wheel-angle measurements and component condition that affect tracking and tire wear. Bring your 2026 Ram 1500 REV to Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale for a factory-spec alignment — schedule service.

Service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale, 10101 West Papago Freeway, Avondale, AZ 85323, includes measurement of camber, caster, and toe on all four wheels. Where the suspension allows, the technician adjusts the angles toward the manufacturer’s specification. The inspection is designed to identify conditions that could keep the alignment from holding.

Because no manufacturer maintenance interval is stated for this model year, drivers can use symptoms, tire wear, major pothole impacts, and suspension work as practical reasons to request a measurement. To reach the dealership, call 480-207-2126 or schedule service online.