2026 Ram 1500 Alignment: Specs & Service

An alignment is appropriate when the truck develops handling or tire-wear symptoms, after suspension work, or after a major pothole impact. A measurement can show whether the current angles remain within factory specification before an adjustment is recommended.

• Check alignment after suspension component replacement.
• Pay attention after a major pothole impact.
• Use measured angles to determine whether adjustment is needed.

Wheels outside their intended angles can scrub the tires as the pickup travels, causing uneven tread wear. Larry H. Miller Chrysler Dodge Jeep Ram Avondale also checks the steering and suspension for wear that could affect alignment results.

• The truck pulls on a flat road.
• The steering wheel is off center while driving straight.
• One tire edge wears faster than the other.

The service begins with an inspection of the tires, steering, and suspension for wear that could hold an alignment out of specification. The goal is to measure the current angles first, then identify whether adjustment is appropriate.

• Camber, caster, and toe measurement.
• Inspection of tires, steering, and suspension components.
• Adjustment toward manufacturer specification where possible.

An alignment inspection helps identify wear that may affect the measured angles or cause the truck to move out of specification again. Larry H. Miller Chrysler Dodge Jeep Ram Avondale checks the related components before recommending an adjustment, so the next step can address the actual cause.

• Steering components may need inspection.
• Suspension wear can affect alignment results.
• Adjustment may not hold if worn parts remain.

A truck that tracks straight does not automatically need an adjustment. If you notice an off-center wheel or uneven tread wear, measuring camber, caster, and toe can show whether the angles remain within the manufacturer's specification before paying for an adjustment.

• Look for uneven wear across the tire tread.
• Notice whether the steering wheel stays centered.
• Consider measurement after suspension work or impact.

The service measures all four wheels and checks tires, steering, and suspension components for wear that could affect the result. Use the service page to connect with the dealership about booking an alignment for your pickup.

• Service location: 10101 West Papago Freeway.
• City: Avondale, Arizona.
• Phone: 480-207-2126.

Where the suspension allows, the angles are adjusted toward the manufacturer's specification. This gives the technician a measured basis for determining whether an adjustment is needed rather than relying only on how the truck feels during a drive. The service is intended to address symptoms such as pulling, an off-center steering wheel, or faster wear on one tire edge.

To discuss service for your 2026 Ram 1500, use the schedule service page or call 480-207-2126.

Inspection is important before any adjustment. Tires, steering components, and suspension parts with excessive wear can cause an alignment to move out of specification or prevent the angles from being adjusted correctly. If the pickup pulls, the steering wheel is not centered, or one edge of a tire wears faster, measurement can help separate an alignment concern from a component concern.

Bring your 2026 Ram 1500 to Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale for a factory-spec alignment — schedule service.

The dealership is located at 10101 West Papago Freeway in Avondale. During the visit, the tires, steering, and suspension components are inspected for wear that could affect the alignment. That step helps determine whether an adjustment is appropriate or whether a related component may be contributing to the concern.

To arrange service for your 2026 Ram 1500, visit the service page or call 480-207-2126 for assistance.