2025 Ram 2500 Alignment: Specs & Service

The manufacturer's maintenance schedule does not specify an alignment interval for this model year. An alignment check is useful when steering or tire-wear symptoms appear, even if the regular time or mileage guidance has not arrived. Larry H. Miller Chrysler Dodge Jeep Ram Avondale can measure the current angles before recommending an adjustment.

• Check alignment after major pothole impacts.
• Recheck after suspension or steering component work.
• Inspect tires for one-edge wear between services.

These symptoms can indicate that camber, caster, or toe has moved away from specification. A flat-road pull or steering wheel that does not sit straight deserves attention before tire wear becomes more severe. The service inspection also looks for steering and suspension wear that could affect alignment results.

• Vehicle pulls left or right on a flat road.
• Steering wheel sits off center while driving straight.
• Tire tread wears faster along one edge.

The technician begins by inspecting the tires, steering, and suspension for wear that could hold the alignment out of specification. Current angles are measured against the factory specification before any adjustment is recommended. This approach helps identify whether the vehicle needs an alignment adjustment or further inspection.

• Camber, caster, and toe measurement on all four wheels.
• Inspection of tires, steering, and suspension components.
• Adjustment toward the manufacturer's specification where possible.

An alignment corrects wheel angles, but it cannot repair a loose or worn steering or suspension component. Larry H. Miller Chrysler Dodge Jeep Ram Avondale inspects those components before recommending an adjustment. You receive a clearer explanation of whether the concern is an alignment issue or requires additional attention.

• Inspect tie rods for wear or looseness.
• Check ball joints and strut-related components.
• Identify conditions that could move the angles again.

A truck that tracks straight may not need an immediate adjustment. However, measuring the angles can reveal developing tire-wear concerns before they become obvious from the driver seat. Booking service gives you current measurements against the factory specification, so you can learn whether an adjustment is needed before paying for one.

• Consider a check after a major pothole impact.
• Recheck after steering or suspension repairs.
• Use tire wear as an early warning sign.

The measurement shows whether the wheels are positioned correctly and whether an adjustment may help correct pulling, off-center steering, or uneven tread wear. The technician also checks for tire, steering, and suspension wear that could affect the result. This diagnostic step helps separate an alignment concern from a component concern.

• Measure all four wheel alignment angles.
• Compare current angles with factory specification.
• Review related tire and suspension condition.

Next, the technician measures camber, caster, and toe on all four wheels and compares the readings with the manufacturer's specification. Where the suspension allows, the angles are adjusted back toward that specification. The service focuses on the measurements that influence tire contact, steering position, and straight-line tracking.

Booking an alignment gives you current angle measurements against the factory specification, helping you determine whether an adjustment is needed before paying for one. To schedule service, call 480-207-2126 or visit Larry H. Miller Chrysler Dodge Jeep Ram Avondale at 10101 West Papago Freeway, Avondale, AZ 85323.

Inspection is an important part of the process because worn tires, steering parts, or suspension components can cause an alignment to move out of specification again. Symptoms such as pulling to one side, an off-center steering wheel, or tread wear concentrated on one edge can point to an alignment concern. A measurement helps identify the current condition before a recommendation is made.

The 2025 Ram 2500 is offered with rear-wheel drive or four-wheel drive across its eight trims, so the service begins with the vehicle's actual configuration and current condition. Bring your 2025 Ram 2500 to Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale for a factory-spec alignment — schedule service.

Larry H. Miller Chrysler Dodge Jeep Ram Avondale is located at 10101 West Papago Freeway in Avondale, AZ. The team can inspect the 2025 Ram 2500's tires, steering, and suspension before determining whether an adjustment is appropriate. That inspection is especially useful after a significant pothole impact or steering and suspension work.

To ask about alignment service or arrange a visit, call 480-207-2126. You can also use the dealership's service scheduling page to request an appointment at the Avondale location.