2025 Ram 1500 REV Alignment: Specs & Service

The manufacturer maintenance schedule does not set a fixed alignment interval for this model year. An alignment check is especially useful when road impacts or repairs may have changed wheel angles. Avondale drivers can schedule an inspection when symptoms appear rather than automatically paying for an adjustment.

• Check alignment after a major pothole impact.
• Have the angles checked after suspension work.
• Use tire wear and steering behavior as practical warning signs.

Wheels that are out of alignment scrub the tires as the vehicle rolls, which can wear the tread unevenly and pull the steering off center. A vibration at speed can also be a reason to request an inspection, although other tire or wheel conditions may contribute. Larry H. Miller Chrysler Dodge Jeep Ram Avondale can measure the angles and identify whether adjustment is needed.

• Vehicle pulls on a flat road.
• Steering wheel sits off center while driving straight.
• One tire edge wears faster than the other.

The inspection also covers tire condition, steering components, and suspension parts that could prevent the alignment from holding. The measurement establishes whether an adjustment is necessary before service is performed. This approach gives drivers a clear understanding of the current wheel angles.

• Camber, caster, and toe measurement on all four wheels.
• Adjustment toward manufacturer specification where possible.
• Inspection of tires, steering, and suspension components.

An alignment corrects wheel angles, but it cannot repair a loose or worn component. The service inspection checks steering and suspension parts that could move the wheels out of specification again. If a concern is found, the technician explains the condition so you can decide what work is appropriate.

• Tie-rod wear can affect steering movement and alignment stability.
• Ball-joint wear can change wheel position.
• Strut concerns can prevent consistent alignment results.

It can still be worthwhile after a major pothole impact, suspension work, or a tire-wear concern. Measuring the current angles against the factory specification helps determine whether adjustment is actually needed. That measurement-first approach can prevent paying for an adjustment when the vehicle remains within specification.

• Review tire tread wear for edge damage.
• Notice whether the steering wheel remains centered.
• Request a measurement after a significant road impact.

The service measures all four wheel angles and checks tires, steering, and suspension components before adjustment. Booking lets the technician compare the current angles with the manufacturer specification and explain whether service is needed. Visit the dealership service department or use the schedule service page.

• Location: 10101 West Papago Freeway, Avondale, AZ 85323.
• Service focus: camber, caster, and toe measurement.
• Online scheduling: schedule an appointment.

Next, the technician measures camber, caster, and toe on all four wheels. These measurements are compared with the manufacturer specification for the vehicle. Where the suspension allows adjustment, the angles are corrected toward that specification. The goal is to establish whether an adjustment is needed before charging for one, rather than assuming every vehicle requires the same correction.

After the measurements and any permitted adjustments, the technician can explain the results and the condition of related components. A road test may help confirm steering behavior after service. To arrange an inspection, schedule service or call 480-207-2126. Service specials are available through the service specials page.

Avondale road conditions can expose wheels and tires to impacts from potholes, construction areas, and changing pavement surfaces. Those impacts may alter wheel angles even when the vehicle still feels mostly normal. Measuring camber, caster, and toe provides a specific view of the current alignment rather than relying only on steering feel.

The dealership is located at 10101 West Papago Freeway, Avondale, AZ 85323. Contact the service department at 480-207-2126 or use the schedule service page to request an alignment inspection for your 2025 Ram 1500 REV.

The process also includes inspection of tires, steering, and suspension components. Worn tie rods, ball joints, struts, or other related parts can keep an alignment from holding, so those conditions should be identified before relying on an adjustment. Uneven tread wear, pulling, an off-center steering wheel, or vibration at speed are useful reasons to request an evaluation.

Bring your 2025 Ram 1500 REV to Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale for a factory-spec alignment — schedule service.