2024 Ram ProMaster EV Delivery Van Alignment: Specs & Service

Alignment service is appropriate after suspension work, a major pothole impact, or when handling and tire wear change. Avondale roads and construction zones can create impacts that affect wheel angles. A measurement checks the current angles against factory specifications before an adjustment is recommended.

• Measurement follows camber, caster, and toe angles.
• Technicians inspect tires, steering, and suspension components.
• Adjustments are made where the suspension allows.

Wheels that are out of alignment scrub the tires as the van rolls, which can accelerate uneven tread wear. If the vehicle pulls on a flat road or the steering wheel is not centered while driving straight, an alignment measurement can identify whether the angles need correction.

• Vehicle pulls left or right on a flat road.
• Steering wheel sits off center while traveling straight.
• One tire edge wears faster than the rest of the tread.

The service also includes an inspection of the tires, steering, and suspension components for wear that could prevent the alignment from holding. Where the suspension allows, the angles are adjusted back to the manufacturer's specifications. This process helps determine whether correction is needed before you pay for an adjustment.

• Camber, caster, and toe measurement at all four wheels.
• Inspection for worn tires, steering, or suspension components.
• Adjustment to manufacturer specification where possible.

An inspection should be completed before alignment adjustment because loose or worn suspension and steering components can change the measured angles. The technician can identify conditions that affect alignment and explain whether an adjustment is appropriate. This approach helps separate an alignment concern from a component-wear concern.

• Steering and suspension components are checked for wear.
• Tire condition is reviewed for signs of angle-related wear.
• Alignment adjustment is performed where the suspension allows.

Service becomes more useful after a major pothole impact, suspension work, or a visible change in tire wear or steering position. A measurement provides the current camber, caster, and toe angles so you can learn whether an adjustment is needed before paying for one.

• Check for pulling on a flat road.
• Look for an off-center steering wheel.
• Inspect both edges of the tire tread for uneven wear.

The service measures camber, caster, and toe on all four wheels and checks the tires, steering, and suspension for wear. Angles are adjusted toward the manufacturer's specifications where the suspension allows. Use the service scheduler to request an appointment.

• Location: 10101 West Papago Freeway, Avondale, AZ 85323.
• Service covers four-wheel angle measurement.
• Call 480-207-2126 for assistance.

The inspection measures camber, caster, and toe on all four wheels, then checks tire condition along with steering and suspension components. If the suspension allows, the angles are adjusted back toward the manufacturer's specifications. Booking an appointment provides current angle measurements so you can determine whether adjustment is needed before paying for one. This service is available at 10101 West Papago Freeway in Avondale, Arizona.

To arrange an inspection, schedule service online or call 480-207-2126. Larry H. Miller Chrysler Dodge Jeep Ram Avondale is located at 10101 West Papago Freeway, Avondale, AZ 85323.

The technician then measures camber, caster, and toe on all four wheels. These measurements show how each wheel is positioned relative to the manufacturer's specifications. Where the suspension allows, adjustments are made back toward those specifications. The measurement first approach helps identify whether an adjustment is needed before you pay for one, rather than assuming correction is required.

Because the manufacturer maintenance schedule has no stated alignment interval for this model year, symptoms and driving events are useful reasons to request an inspection. If your van pulls, has an off-center steering wheel, or develops uneven tire wear, schedule service or call 480-207-2126.

The technician compares the measured angles with the manufacturer's specifications and adjusts them where the suspension allows. The inspection also covers tires, steering, and suspension components because worn parts can cause an alignment to move out of specification or prevent it from holding. A tire that wears more quickly on one edge, a van that pulls on a flat road, or a steering wheel that sits off center can indicate an angle concern.

Bring your 2024 Ram ProMaster EV Delivery Van to Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale for a factory-spec alignment — schedule service.