2024 Ram 3500 Alignment: Specs & Service

Booking lets the service team measure the current wheel angles against the manufacturer’s specifications before an adjustment is performed. The inspection covers tire, steering, and suspension components that may affect alignment results.

• Camber, caster, and toe measurement
• Adjustment where the suspension allows
• Inspection for wear that could affect alignment

The manufacturer maintenance schedule does not specify an alignment interval for this model year. A check is also sensible when steering or tire-wear symptoms appear, even if the truck has not reached one of those time or mileage points.

• Check after suspension component replacement
• Check after a significant pothole impact
• Check when tread wear becomes uneven

Wheels that are out of alignment can scrub the tires as the truck rolls, wearing tread faster on one edge. A measurement at Larry H. Miller Chrysler Dodge Jeep Ram Avondale can show whether the angles need adjustment.

• Truck pulls on a flat road
• Steering wheel is not centered while driving straight
• One tire edge wears faster than the other

The service begins with an inspection of tires, steering, and suspension components for wear that could hold the alignment out of specification. Booking gives you current angle measurements so you can learn whether an adjustment is needed before paying for one.

• Camber, caster, and toe measurement
• Adjustment to manufacturer specification where possible
• Inspection of tires, steering, and suspension wear

Loose or worn components may affect the wheel angles and contribute to repeated pulling or uneven tread wear. The service inspection helps identify wear in the tires, steering, and suspension before alignment work is completed.

• Inspect steering components for wear
• Inspect suspension components for wear
• Review tire condition before adjustment

It becomes more useful after a major pothole impact, suspension work, or a change in steering feel. Measuring the current angles can confirm whether adjustment is needed before you pay for one.

• Consider a check after suspension work
• Watch for one-edge tire wear
• Schedule an inspection after a major impact

The technician measures camber, caster, and toe on all four wheels. Where the suspension allows, the angles are adjusted back to the manufacturer’s specification. This process addresses the measurements that influence how the truck tracks, how the steering wheel sits, and how the tires contact the road.

Booking an alignment gives you the current angles measured against factory specifications, helping you learn whether adjustment is needed before paying for one. Ask the service team to review the findings and any tire, steering, or suspension wear identified during the inspection. Schedule service or call 480-207-2126.

Before adjustment, the team inspects tires, steering, and suspension components for wear that could hold the alignment out of specification. That inspection matters on a heavy-duty truck because an alignment measurement alone cannot correct a worn component. If the inspection identifies a condition affecting the result, the service team can explain what was found before further work is considered.

Bring your 2024 Ram 3500 to Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale for a factory-spec alignment — schedule service.

Arizona driving conditions can expose tires and suspension components to impacts from potholes and active road construction. A major impact may change how the truck tracks even when the change is subtle at first. Because an alignment can be checked before an adjustment is purchased, the measurement helps determine whether service is appropriate.

For directions or appointment assistance, visit Larry H. Miller Chrysler Dodge Jeep Ram Avondale at 10101 West Papago Freeway, Avondale, AZ 85323, or call 480-207-2126. You can also schedule service online.