2024 Ram 2500 Alignment: Specs & Service

An alignment is not automatically required at every tire rotation if the truck tracks straight and the tires wear evenly. The service measures the current wheel angles against factory specifications before an adjustment is recommended. For a 2024 Ram 2500, prompt inspection is sensible after a hard impact or suspension repair.

• Check alignment after major pothole damage.
• Have the angles measured after suspension work.
• Use tire wear and steering feel as warning signs.

Wheels out of alignment can scrub the tires as the truck rolls, wearing tread faster on one edge. A flat-road pull or steering wheel that does not sit centered while driving straight also warrants an inspection. Larry H. Miller Chrysler Dodge Jeep Ram Avondale can measure the angles and identify whether adjustment is needed.

• Uneven wear on one tire edge.
• Pulling on a flat road.
• Steering wheel sitting off center.

The inspection also looks at tires, steering, and suspension components for wear that could keep the alignment out of specification. Booking first gets the current angles measured against the factory specification, so you learn whether an adjustment is needed before paying for one. This approach helps separate an alignment issue from a worn component.

• Camber, caster, and toe measurement.
• Adjustment where the suspension allows.
• Inspection of tires, steering, and suspension.

An alignment may not correct a continuing pull or recurring uneven wear when a steering or suspension component has excessive wear. The inspection for a 2024 Ram 2500 includes the components that could hold the wheels out of specification. The technician can explain the condition found and whether an adjustment is appropriate.

• Inspect tie rods for wear.
• Check ball joints before setting angles.
• Evaluate struts and related suspension components.

Even tire wear and centered steering suggest there may be no immediate adjustment need, but measurement is the way to verify the current angles. Booking an appointment at Larry H. Miller Chrysler Dodge Jeep Ram Avondale lets the technician compare the readings with factory specifications before recommending work. That helps avoid paying for an adjustment that is not needed.

• Measure after a significant road impact.
• Measure after replacing suspension components.
• Monitor tread wear and steering position.

The alignment service measures all four wheel positions and checks tires, steering, and suspension components for conditions that could affect the result. A booking gives you current angle measurements against the factory specification before an adjustment is recommended. Call 480-207-2126 or use the schedule service page.

• Location: 10101 West Papago Freeway.
• City: Avondale, AZ 85323.
• Phone: 480-207-2126.

Next, the technician measures camber, caster, and toe on all four wheels against the manufacturer's specification. Where the suspension allows, the angles are adjusted toward that specification. The purpose is to establish the truck's current alignment position before work is recommended, giving you a clear basis for the service decision.

After adjustment, the alignment result can be reviewed against the measured condition. A road test may help confirm steering feel and tracking. The manufacturer's maintenance schedule has no stated alignment interval for this model year, so symptoms, impact, suspension work, and tire wear are useful reasons to request measurement. Schedule service or call 480-207-2126.

The inspection also checks tires, steering, and suspension components for wear that could hold an alignment out of specification. Worn tie rods, ball joints, or struts can prevent a corrected setting from lasting, making component evaluation an important part of the process. Uneven tread wear, a flat-road pull, an off-center steering wheel, or vibration at speed should be discussed at check-in.

For the 2024 Ram 2500, the service is performed as a measurement-first inspection followed by adjustment where appropriate. This helps determine whether the wheel angles need correction before you pay for one. Bring your 2024 Ram 2500 to Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale for a factory-spec alignment — schedule service.

The service measures camber, caster, and toe on all four wheels, then adjusts them toward the manufacturer's specification where the suspension allows. Tires, steering components, and suspension parts are inspected for wear that could affect the reading or keep the alignment from holding. This is especially useful after a major pothole impact or suspension work.

Visit 10101 West Papago Freeway, Avondale, AZ 85323, or call 480-207-2126 for assistance. You can also schedule service online and ask for current alignment measurements before an adjustment is recommended.