2020 Chrysler 300 Oil Change: Specs & Service

Following the published interval helps maintain lubrication, heat control, and debris removal in the 2020 Chrysler 300. Oil loses its additive package and heat-carrying ability before it necessarily looks dirty. Drivers should also pay attention to the oil-change reminder and the time since the last service.

• Engine oil change interval: every 10,000 miles
• Oil filter replacement interval: every 10,000 miles
• Service is available in Avondale, AZ

The service begins by draining the existing oil and refilling the engine with the grade specified by the manufacturer. Installing a fresh filter helps capture contaminants, while resetting the monitor keeps the vehicle’s maintenance reminder aligned with the completed service. Book through the service department in Avondale.

• Drain and refill with the specified oil grade
• Install a new oil filter
• Reset the oil-life monitor and check underhood fluids

Other signs can include oil that appears dark or low on the dipstick and a ticking or louder engine note at startup. These observations do not replace the manufacturer’s mileage-based schedule. If the reminder is illuminated or the vehicle is past its service interval, schedule an appointment in Avondale.

• Oil-change reminder light is illuminated
• Oil looks dark or reads low on the dipstick
• Engine sounds louder or ticks during startup

Quick-lube shops may offer a convenient alternative, and drivers can compare each provider’s process and pricing. Larry H. Miller Chrysler Dodge Jeep Ram Avondale focuses on the specified service for the 2020 Chrysler 300, including the oil and filter replacement required at the 10,000-mile interval. The choice depends on the driver’s priorities for convenience, documentation, and service scope.

• Manufacturer-specified oil grade
• New oil filter installation
• Maintenance visit documented through the dealership service department

Engine oil gradually loses its additive package and heat-management capability, even when it does not appear excessively dirty. Replacing the oil and filter supports consistent lubrication for the 2020 Chrysler 300’s V6 or V8 engine. The service also provides an opportunity to check underhood fluid levels.

• Helps carry heat away from engine components
• Helps move debris toward the oil filter
• Includes an underhood fluid-level check

The sedan uses a V-layout engine with displacement ranging from 3.6 to 5.7 liters and an 8-speed automatic transmission. Torque ranges from 260 to 394 lb-ft across the trims. Regular oil service supports the engine maintenance schedule for this range of Chrysler 300 powertrains.

• Horsepower range: 292–363 hp
• Engine displacement range: 3.6–5.7 L
• Transmission: 8-speed automatic

Fuel economy varies by trim and powertrain, so the range reflects the model lineup rather than one configuration. The 2020 Chrysler 300 uses regular unleaded fuel and has an 18.5-gallon fuel capacity. Its sedan body style pairs this powertrain range with a 16.3-cubic-foot cargo area behind the rear seats.

• City fuel-economy range: 16–19 MPG
• Highway fuel-economy range: 25–30 MPG
• Fuel capacity: 18.5 gallons

The sedan’s towing capability is paired with a curb-weight range of 4,013–4,380 pounds across the five trims. Drivers should confirm equipment and operating requirements before towing. Larry H. Miller Chrysler Dodge Jeep Ram Avondale can help with routine maintenance for the Chrysler 300 in Avondale, AZ.

• Maximum towing capacity: 1,000 pounds
• Curb-weight range: 4,013–4,380 pounds
• Body style: sedan

Oil that looks dark or low on the dipstick, an illuminated oil-change reminder, or a ticking or louder engine note at startup can signal that service is due. Regular oil changes matter because engine oil loses its additive package and its ability to carry heat and debris long before it necessarily looks dirty. The 2020 Chrysler 300 also uses regular unleaded fuel, with horsepower ranging from 292 to 363 hp across the model’s trims.

Bring your 2020 Chrysler 300 to Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale for an oil change using the manufacturer-specified oil grade — schedule service.

Routine service is especially useful for a sedan that may encounter frequent starts, city driving, or towing duty. Those conditions can place more repeated demands on the engine’s oil and heat-management system than steady highway travel. The published maintenance schedule for this model year calls for engine oil and oil-filter replacement every 10,000 miles.

Use the dealership’s service scheduler to request an appointment, or call (480) 207-2126 for assistance. You can also review current service specials.

The visit also includes a check of underhood fluid levels. This inspection can help identify fluid levels that need attention while the vehicle is already in the service department. The reason for following the mileage schedule is practical: engine oil gradually loses additives and its ability to carry heat and debris, even if it does not look dirty.

The manufacturer’s published interval for the 2020 Chrysler 300 is every 10,000 miles for both engine oil and the oil filter. To arrange service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale, schedule an appointment or call (480) 207-2126.