Larry H. Miller Chrysler Dodge Jeep Ram Avondale

2013 Ram C/V Tradesman Oil Change

Ram C/V Tradesman Oil Change service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, AZ

The 2013 Ram C/V Tradesman is a front-wheel-drive flex-fuel minivan available in one trim, combining useful cargo space with V6 power for work, family, and commercial transportation in Avondale, AZ. Its 3.6-liter engine produces 283 horsepower and 260 lb-ft of torque, while the cabin offers 144.4 cubic feet of cargo room behind the rear seats. Larry H. Miller Chrysler Dodge Jeep Ram Avondale, located at 10101 West Papago Freeway, serves drivers throughout Avondale with vehicle maintenance designed around manufacturer-specified fluids and components. An oil change includes draining and refilling the engine oil, installing a new filter, resetting the oil-life monitor, and checking underhood fluid levels.

Frequently Asked Questions

11 common questions answered

How many trims does the 2013 Ram C/V Tradesman have?The 2013 Ram C/V Tradesman comes in one trim.

That single-trim configuration includes a 3.6-liter V6, six-speed automatic transmission, and front-wheel drive. The engine produces 283 horsepower and 260 lb-ft of torque, giving this Avondale-area minivan useful capability for daily transportation and cargo hauling.

Body style: minivan
Fuel type: flex-fuel, including unleaded and E85
Maximum towing capacity: 3,600 pounds

What does an oil change include for a 2013 Ram C/V Tradesman?An oil change includes fresh manufacturer-specified oil, a new oil filter, an oil-life monitor reset, and an underhood fluid-level check.

The service addresses the engine’s need for clean oil that can carry heat and debris. Larry H. Miller Chrysler Dodge Jeep Ram Avondale can document the visit in the vehicle’s service history, helping maintain a clear record for this front-wheel-drive Ram minivan.

Drain and refill the engine oil
Replace the oil filter
Check underhood fluid levels

When should I get an oil change for my 2013 Ram C/V Tradesman?The manufacturer maintenance interval for this 2013 Ram C/V Tradesman is not stated here, so service should be guided by the vehicle’s maintenance schedule and oil-life reminder.

Drivers in Avondale may notice an oil-change reminder, mileage past the last service, dark or low oil on the dipstick, or a ticking or louder engine note at startup. Checking the oil level and responding to the reminder can help keep the 3.6-liter V6 properly lubricated.

Watch for the oil-change reminder light
Check the dipstick for low or dark oil
Arrange service if the engine sounds louder at startup

Why does the 2013 Ram C/V Tradesman need regular oil changes?Engine oil loses its additive package and ability to carry heat and debris as it ages.

Oil can look only moderately dirty while its protective properties have declined. For the 2013 Ram C/V Tradesman, regular oil service supports the 3.6-liter V6 by replacing aged lubricant and the filter that captures contaminants. The service also includes an oil-life monitor reset and an underhood fluid check.

Fresh oil helps carry engine heat
A new filter captures oil contaminants
Service records document completed maintenance

What are the signs my 2013 Ram C/V Tradesman needs an oil change?Common signs include an oil-change reminder, dark or low dipstick oil, and a ticking or louder engine sound at startup.

These signs can indicate that the engine oil is past its service point or that the oil level needs attention. Avondale drivers should check the dipstick safely and schedule an inspection if the reminder appears or the engine’s startup sound changes.

Oil-change reminder light or overdue mileage
Dark-looking or low oil on the dipstick
Ticking or louder engine note at startup

How much cargo space does the 2013 Ram C/V Tradesman have?The 2013 Ram C/V Tradesman has 144.4 cubic feet of cargo space behind the rear seats.

That capacity makes the single-trim Ram C/V Tradesman practical for equipment, supplies, and everyday hauling around Avondale. Its 202.8-inch length and 121.2-inch wheelbase provide a substantial minivan footprint while front-wheel drive supports routine road use.

Cargo behind rear seats: 144.4 cubic feet
Vehicle length: 202.8 inches
Maximum towing capacity: 3,600 pounds

What engine is in the 2013 Ram C/V Tradesman?The 2013 Ram C/V Tradesman uses a 3.6-liter, 3,605-cc V6 engine producing 283 horsepower and 260 lb-ft of torque.

The engine is paired with a six-speed automatic transmission and front-wheel drive. Peak power is reached at 6,400 rpm, while peak torque occurs at 4,400 rpm. The flex-fuel system supports unleaded gasoline and E85.

Engine layout: V6
Transmission: six-speed automatic
Drivetrain: front-wheel drive

Where can I get a 2013 Ram C/V Tradesman oil change in Avondale?Larry H. Miller Chrysler Dodge Jeep Ram Avondale provides oil-change service at 10101 West Papago Freeway in Avondale, AZ 85323.

The service visit includes oil and filter replacement using the grade specified for the engine, an oil-life monitor reset, and an underhood fluid-level check. Drivers can contact the service department at 480-207-2126 or visit the service page.

Dealership: Larry H. Miller Chrysler Dodge Jeep Ram Avondale
Address: 10101 West Papago Freeway, Avondale, AZ 85323
Phone: 480-207-2126

2013 Ram C/V Tradesman Oil SpecificationsThe 2013 Ram C/V Tradesman uses a 3.6-liter V6 engine with 3,605 cc of displacement. It produces 283 horsepower and 260 lb-ft of torque through a six-speed automatic transmission and front-wheel drive. The vehicle uses flex-fuel, including unleaded gasoline and E85. The manufacturer’s maintenance interval, oil viscosity, oil capacity in quarts, filter part reference, severe-duty interval, and engine-oil-related technical service bulletins are not stated here, so the appropriate oil grade and fill level should be confirmed for the vehicle before service.

Oil service replaces lubricant that has lost its additive package and ability to carry heat and debris. The visit includes draining the old oil, installing a new filter, refilling with the grade the engine specifies, resetting the oil-life monitor, and checking underhood fluid levels. Drivers may notice an oil-change reminder, dark or low dipstick oil, or a ticking or louder engine note at startup. Bring your 2013 Ram C/V Tradesman to Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale for an OEM-spec oil change — schedule service.

2013 Ram C/V Tradesman Oil Change Service in AvondaleLarry H. Miller Chrysler Dodge Jeep Ram Avondale serves drivers at 10101 West Papago Freeway in Avondale, AZ. An oil change for the 2013 Ram C/V Tradesman is designed around the vehicle’s 3.6-liter V6 and includes the oil and filter replacement specified for the engine. The technician also resets the oil-life monitor and checks underhood fluid levels before the vehicle returns to the road.

Oil condition matters because lubricant gradually loses its ability to carry heat and debris, even when it does not appear severely dirty. Drivers should pay attention to the oil-change reminder, overdue mileage, a low or dark dipstick reading, or a louder engine note at startup. Contact the dealership at 480-207-2126 or visit the service page to arrange an appointment in Avondale.

What's Included in a 2013 Ram C/V Tradesman Oil ChangeThe service begins by draining the used engine oil from the 3.6-liter V6. A new oil filter is installed, and the engine is refilled with the oil grade specified for the vehicle. The technician then resets the oil-life monitor and checks the underhood fluid levels. These steps replace aged lubricant and restore a clear service reminder for the next maintenance visit.

Booking an oil change gets the oil and filter replaced with the grade the engine specifies and records the visit against the vehicle’s history. The service should be performed according to the vehicle’s maintenance schedule and oil-life reminder; a specific manufacturer interval is not stated here. To arrange service, call 480-207-2126 or schedule service with Larry H. Miller Chrysler Dodge Jeep Ram Avondale.