AdChoices
Larry H. Miller Chrysler Dodge Jeep Ram Avondale
2013 Ram 2500 Brake Specials
Ram 2500 Brake Specials service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, AZ
SCHEDULE NOWFrequently asked questionsThe 2013 Ram 2500 is a full-size pickup with a 5.7-liter V8, 383 horsepower, 400 lb-ft of torque, and rear-wheel or four-wheel drive across its five trims. At Larry H. Miller Chrysler Dodge Jeep Ram Avondale in Avondale, Arizona, our Brake Specials service evaluates the complete braking system rather than focusing on pads alone. Technicians measure remaining pad material at all four corners, check rotor thickness and runout, and inspect calipers, hoses, hardware, and brake fluid condition. This approach helps identify the cause of squealing, grinding, pedal pulsation, soft pedal feel, or a brake warning light before those concerns affect everyday driving or towing duty. Schedule service or review service specials.
Frequently Asked Questions
11 common questions answered
How much does a brake job cost for a 2013 Ram 2500?Brake job pricing for a 2013 Ram 2500 is determined after the brake system is measured and the current service special is applied.
The Brake Specials service evaluates pads, rotors, calipers, hoses, hardware, and fluid before recommendations are made. Pricing can differ between the front and rear axles because each axle is assessed separately. Larry H. Miller Chrysler Dodge Jeep Ram Avondale provides the applicable special for the work the vehicle actually needs.
- Pad material is measured at all four corners.
- Rotor thickness and runout are checked.
- Review the service specials before booking.
How long does a 2013 Ram 2500 brake replacement take?The brake inspection covers all four corners, while replacement time depends on whether one axle or both axles need work.
A complete assessment includes pad measurements, rotor measurements, and inspection of calipers, hoses, hardware, and brake fluid. Because the service recommendation depends on those findings, the work is planned around the affected axle or axles rather than assuming all four brakes require replacement.
- Front and rear brake areas are evaluated.
- Rotor runout is checked along with thickness.
- Schedule service for an inspection-based recommendation.
How long do 2013 Ram 2500 brake pads last?Brake pad life for a 2013 Ram 2500 depends on use, including stop-and-go driving, towing, and repeated heavy braking.
The truck is available with a 5.7-liter V8 and towing capacity ranging from 11,120 to 18,350 pounds across its five trims. Towing and frequent braking place different demands on the system than steady highway driving. Measuring the remaining pad material provides a more useful answer than relying on a calendar interval.
- Pad material is measured on all four corners.
- Towing can increase brake-system workload.
- Rotor condition is evaluated with pad wear.
What are the signs of bad brakes on a 2013 Ram 2500?Common warning signs include squealing, scraping, grinding, a pulsing or soft pedal, a brake warning light, or dark-looking fluid.
These symptoms can involve more than brake pads. Rotors, calipers, hoses, hardware, and fluid can all affect braking performance, so the system should be assessed together. A brake warning light or grinding sound deserves prompt attention before further driving.
- Squealing may indicate a pad wear warning.
- Pulsation can accompany rotor concerns.
- Dark fluid is checked during the inspection.
What's included in a 2013 Ram 2500 brake service?The Brake Specials service measures pad material and rotor condition while inspecting calipers, hoses, hardware, and brake fluid.
The inspection covers all four corners so the braking system can be considered as a complete unit. Technicians measure rotor thickness and runout, then assess related components that can influence braking feel and component life. The current special is applied to the work the vehicle actually needs.
- Pad material is measured at all four corners.
- Rotor thickness and runout are measured.
- Calipers, hoses, hardware, and fluid are inspected.
Should I replace brake pads and rotors at the same time on a 2013 Ram 2500?Brake pads and rotors should be replaced together only when rotor thickness, runout, or condition shows the rotors are outside the applicable specification.
If the rotors remain within specification, pads may be appropriate by themselves. If the rotors do not meet the required measurement or condition, replacing both components can address the system concern more completely. The Brake Specials inspection measures the rotors before a recommendation is made.
- Rotor thickness is measured.
- Rotor runout is checked.
- Pad condition is considered with rotor results.
Is it worth getting brakes done at the dealer versus an independent brake shop in Avondale?An independent shop may offer different parts pricing, while the dealership can evaluate the full system using a vehicle-specific service process.
The right choice depends on your priorities, the repair recommendation, and the parts and inspection details included in the estimate. Larry H. Miller Chrysler Dodge Jeep Ram Avondale’s Brake Specials service checks pads, rotors, calipers, hoses, hardware, and fluid together. Compare the complete scope of work before deciding.
- Ask whether rotor thickness and runout are measured.
- Confirm whether all four corners are inspected.
- Review the service special and recommended work.
Can I drive my 2013 Ram 2500 with worn brakes?A 2013 Ram 2500 with grinding, a soft or pulsing pedal, a warning light, or reduced braking should be inspected promptly.
Brake wear can involve pads, rotors, calipers, hoses, hardware, or fluid, and ignoring one component can shorten the life of another. If braking feels unsafe or performance has changed significantly, avoid unnecessary driving and arrange an inspection. The service evaluates the complete system at all four corners.
- Grinding can signal advanced brake wear.
- A soft pedal requires prompt attention.
- Book service at Larry H. Miller Chrysler Dodge Jeep Ram Avondale.